Menu

Logo

SERVICES

Pressure testing, cleaning, drying and inspections are part of our main activities. We work both in the testing phase and acceptance of systems, such as the support services for operations in industrial facilities.

PRESSURE TESTING

The evaluation of the integrity in pipelines it’s a task that requires experience and the latest techniques and tools

  • CLEANING

    CLEANING

    The purpose of a mechanical cleaning in a pipeline is the removal of any reaming debris inside the line, as well as any metallic fragments left from the mechanized or welding works.

    The previous cleaning of the line it’s crucial for the proper use of pigs in the pipeline during the filling phase.

  • FILLING

    FILLING

    During this stage it’s crucial to guarantee the complete removal of the air inside the pipeline.

    The pumping station for the filling of the lines has to be setup near a water source.

    During the filling stage, the following data will be recorded:

    ·      Flow
    ·      Total volume
    ·      Pressure
    ·      Water temperature
    ·      Time

  • PRESSURE TESTING

    PRESSURE TESTING

    The pipeline has to be pressure tested prior to be placed into service. ITP with its lengthy experience offers all of the professional services related to this camp. The pressure tests are usually carried out with water, air, nitrogen or other means.

    The operations are divided in two parts:

    • A pressure test
    • A leak test

    All parameters related to these activities are recorded and properly documented.

  • DEWATERING

    DEWATERING

    Once successfully completed the pressure and leak test, the depressurization and dewatering of the line takes place.

    For the dewatering, the bidirectional pigs previously used for the filling and calibration operations of the line, are propelled by compressed air from the receiving test heads back to the launching test heads.

  • INTELLIGENT INSPECTION

    INTELLIGENT INSPECTION

    The final calibration of the line with the run of a Caliper pig, consists in the dimensional control of the inside of the pipeline. The Caliper pig, mainly propelled by compressed air, its capable of detecting all kind of anomalies and accessories within the pipeline, such as: ovalizations, dents, cracks, weld joints, wall thickness changes, insulating joints, valves etc…

    All results from inspection are analyzed and Final report is generated.

DRIYING AND CLEANING OF PIPELINES

ITP Service offers a wide range of cleaning and drying techniques capable to meet all kind of necessities.

NITROGEN SERVICES

We have a large experience with different nitrogen services.

SPECIAL SERVICES

ITP Service also offers gas transfer services between gas lines, as well as equipment rental with highly qualified personnel.

CONTACT

Spain

INTERNATIONAL TESTING PIPELINES S.A,
Ctra. N-420 Km.821
(Apartado Correos nº 59)
43740 Mora d'Ebre
Tarragona (SPAIN)
Tel: +34 977 401 898 - Fax: +34 977 402 433
E-mail: itpservice@itpservice.com
GPS: 41.083961 N 0.622927 E

Barcelona

INTERNATIONAL TESTING PIPELINES, S.A.
Oficina Barcelona
C/ Santa Fé de Nuevo México, nº1, 4º-1º
08003 Barcelona
Tel.: 93 414 32 41 / Fax: 93 414 32 41
GPS: 41.393659 N 2.134818 E

Brasil

INTERNATIONAL TESTING PIPELINES DO BRASIL LTDA.
Rua Rio Branco, 100
Barra do jucu – Vila Velha – Es
BRASIL
Tel: +55 (27) 326 019 79
E-mail: mnieto@itpbrasil.com

Mexico

INTERNATIONAL TESTING PIPELINES
MEXICO, S.A. de C.V.
RFC No.: ITP1501065U9
Insurgentes Sur No.1763 Piso 5,
Col. Guadalupe Inn, Del. Alvaro Obregón.
C.P. 01020 Ciudad de Mexico
Tel. +52 1 55 6617 8862

Ecuador

INTERNATIONAL TESTING PIPELINES
ECUADOR ITP S.A.
RUC No.: 0992899905001
María Auxiliadora No. 2
Calle 309 entre Avenida 213 y 214, Ciudad de Manta
ECUADOR
Tel. : +55 (27) 99243-2445
e-mail: mnieto@itpbrasil.com

Política de privacidad | Política de cookies | © 2014 INTERNATIONAL TESTING PIPELINES S.A.

Nuwa